Publish Time: 2024-10-10 Origin: Site
The fully automatic flat surface assembly line labeling head has high adaptability and adjustability, and can be adjusted and installed in all directions. It can be matched to work on various different assembly lines, and can be used to stick self-adhesive labels or self-adhesive films on the flat and curved surfaces of various items, such as books, folders, boxes, cartons, etc.
Due to its wide application, Russian customers came to us and purchased 7 labeling heads + 3 conveyors,
511 upper flat labeling head with bracket hole (left in and right out, the customer provides the printer and bracket (printer and bracket drawings see the attached bracket punching 1.2.3), we leave bracket installation holes)
511 production line flat labeling head with mounting bracket (2 left in and right out upper flat labeling heads with mounting brackets, 1 right in and left out upper flat labeling head, customer printer drawings see the attached mounting bracket 1.2) a total of 3 units
511 standard machine upper flat labeling head (left in and right out upper flat labeling and right in and left out upper flat labeling) a total of 2 units
511 standard machine left side labeling head
Conveyor belt guide (1190 length x 200 width * 750 ± 50mm height, speed 0-25 meters/minute)
Conveyor belt guide (1600 length * 200 width * 750 ± 50mm height, speed 0-25 meters/minute)
The minimum label size compatible with the labeling head is: 10mmx10mm, the maximum compatible length is: 300mm, and the width is 150mm
Labeling head + bracket hole design drawing (the green arrow points to the customer's printer)
labeling head plus printing bracket (two left-in-right-out upper plane assembly line labeling heads, one right-in-left-out upper plane assembly line labeling head)
Standard flat labeling head, one right in and left out, one left in and right out
Standard machine left side labeling head
Belt conveyor guide (no color requirement for guide), size: (1190 length x 200 width * 750 ± 50mm) The green part of the guardrail is a whole piece; the red part of the guardrail is divided into 2 sections, with a spacing of 200mm and a 20mm range for fine adjustment. There is no color requirement for the guide during production, just a reminder
Belt conveyor guide (no color requirement for guide), size: (1600L*200W*750±50mm) The green part of the guardrail is a whole piece; the red part of the guardrail is divided into 2 sections, with a spacing of 200mm and a 20mm range for fine adjustment. There is no color requirement for the guide during production, just a reminder
1. Two-hole round plug
2. It is Russian, and the operating language on the touch screen can be switched between Chinese, English, and Russian
3. All labeling heads have PLC trigger points, and customers can complete the connection with the printer by themselves
Simple matching: can be directly installed on the assembly line and packaging machine, with independent control or linkage control to achieve automatic labeling and unmanned labeling production;
Flexible application: equipped with different labeling mechanisms, it can achieve labeling on flat and uneven surfaces;
Easy adjustment: the adjustment structure adopts a single-rod structure, and the label head can be flexibly adjusted in six degrees of freedom of x/y/z, which can be flexibly matched with different assembly lines;
High labeling accuracy: the label belt bypass correction mechanism prevents the label from deviating, and the subdivided stepper motor drives the label output, and the front and rear positions of the label are accurate;
Intelligent control: automatic photoelectric tracking, with no object no labeling, no label automatic correction and label automatic detection functions to prevent missing labels and label waste;